Skip to main content

Residences in Luanda, Angola


It is a house of 645 sqm total built area (598 sqm total useful area) that features three levels that communicate through an stair and another house with total built area 530 sqm (509 sqm total useful area) that features two levels

Housing three levels
Level ± 0.00 m: gallery, hall, living room, bar area, study, guest bathroom, bedroom for visits with whirlpool tub, kitchen, storage, laundry, maid's bedroom with bathroom, and covered outdoor area with pergola.
+3.30 m Level, two master bedrooms with whirlpool tub possessing two smaller bedrooms with bathrooms with shower, equipment room and be private.
+6.60 m Level: covered terrace that includes an area for the placement of a bar and two bathrooms.
Housing two levels
Level ± 0.00 m: gallery, lounge, bar area, dining room, guest bathroom, two master bedrooms with whirlpool tub possessing a smaller bedroom with bathroom, kitchen, storage, laundry, bedroom with bathroom for employees, and area outside deck with pergola.
+3.30 m Level: covered terrace that includes technical room, an area for the placement of a bar and two bathrooms.
  
Structural system and walls: We use a light-gauge steel (Bailey) to form the entire housing structure both at the vertical and horizontal walls and columns of floors and roofs. The design of the walls (racks) is performed using elements (track and stud) 3 5/8 and 6 ¨ wide as convenience. The columns and beams are achieved by joining several of these elements in dependence on the structural requirements. The spacings and sizes of the grid is specified at the structure.

Comments

Popular posts from this blog

Yonge & Sheppard Tower / 11 & 25 Ordnance Street Development - Laminated Stone Cladding System

(Architectural and Structural Designer  for StoneLamina ) Stone Cladding System Prepare and Design Shop Drawings, Details and Cutsheet Packages. BOM, etc. http://stonelamina.com

Residential-House Extension 57 Brookdale Ave. Toronto, ON, M5M 1P2

    Company: Mechatrosoft Inc     Year: 2013 This project included the following tasks: Site Plan, Existing And Proposed Floor Plans, Sections, Washroom Details, Stair,Underpinning Drawings Hvac Layouts, Plumbing Layouts, Power And Lighting Design Before & After Renovation

Grid Dependent Solar PV System Projects

ATIMIA TECH INC., Toronto, ON (Designer) Grid Dependent Solar PV System Preliminary Design, Site documentation and site analysis, OESC analysis, Zoning analysis and preparation of Development Permit applications, Design document preparation (Array Wiring Plan, Racking Design for construction, etc) Prepared construction Drawings and Details, Electrical and Structural for Grid Dependent Solar PV System, using AutoCAD. Revised Projects and new solutions applied according to OBC and OESC.