Skip to main content

Competition in San Isidro, Lima, Peru



As part of a team, I worked in this contest of ideas for the urban area of Lima, Peru.


Premises
The apartment building projected tries to be a new prototype model for one of the most important residential areas of Lima, Peru.
This means that this project will contribute to the urban image of San Isidro, at the same time emphasizes the contemporary character of XXI century building destined not only for the district but to the Global city.
The architects is why they do not want to take into account only the parameters and regulations of the country, but you want to subscribe to international standards of quality, technology and global architectural design, try this purpose a precedent in terms of local standards, revitalizing local market and imposing paradigms of quality never before seen in the middle.
The Project will have a basic program that will occupy a built area departments helpful 2.800 square meters (maximum) to be located within the area of 677.05 square meters, located at the corner of Cypress Avenue Basadre. In the lot, the building must be organized into the following units:

28 apartments of 100 square meters (maximum area, including circulation and walls) each

Such housing units shall have the following spaces:

• One (1) Master bedroom with bathroom and closet
• Dining-room
• Guest bathroom (toilet and sink)
• Living room
• Service Bathroom (toilet and shower)
• Laundry (with space for washing machine, dryer and laundry)

The building must also be equipped with the following areas:

COMMON SPACES:

• Hall with counter for receiving documents by the custodian or guardian.
• Social areas (swimming pool, sunroof and roof garden on the top floor).

AREAS OF SERVICE:

• Stairs
• Thirty-six (36) parking
• Elevator
• Deposits by department (as much as possible in the parking lot)
• Water Tank
• Trash chute
• Cistern

Comments

Popular posts from this blog

Yonge & Sheppard Tower / 11 & 25 Ordnance Street Development - Laminated Stone Cladding System

(Architectural and Structural Designer  for StoneLamina ) Stone Cladding System Prepare and Design Shop Drawings, Details and Cutsheet Packages. BOM, etc. http://stonelamina.com

Residential-House Extension 57 Brookdale Ave. Toronto, ON, M5M 1P2

    Company: Mechatrosoft Inc     Year: 2013 This project included the following tasks: Site Plan, Existing And Proposed Floor Plans, Sections, Washroom Details, Stair,Underpinning Drawings Hvac Layouts, Plumbing Layouts, Power And Lighting Design Before & After Renovation

Grid Dependent Solar PV System Projects

ATIMIA TECH INC., Toronto, ON (Designer) Grid Dependent Solar PV System Preliminary Design, Site documentation and site analysis, OESC analysis, Zoning analysis and preparation of Development Permit applications, Design document preparation (Array Wiring Plan, Racking Design for construction, etc) Prepared construction Drawings and Details, Electrical and Structural for Grid Dependent Solar PV System, using AutoCAD. Revised Projects and new solutions applied according to OBC and OESC.